Cisco Systems 4490 manual Parameters Default Settings

Appendix B Connecting a Modem to the GSS 4490 Console Port

Cabling a Modem to the GSS 4490

2.Make sure that the settings on the remote console match the GSS default settings specified in Table B-2.

Table B-2 GSS Console Port Default Settings

Parameters	Default Settings
Baud	9600
Data Bits	8
Parity	None
Stop Bits	1
Terminal Type	VT100/ANSI
Flow Control	None

Note When you remotely log in to the GSS 4490 through a modem, make sure that you log out before disconnecting from the session. Use the exec-timeouttimeout command to set the maximum amount of time that the console session can be idle on the GSS 4490 before the GSS 4490 logs it out. By default, the timeout is 150 minutes.

	Cisco Global Site Selector 4490 Hardware Installation Guide
B-4	78-15755-02