Cisco Systems 565, 510 Installation Prerequisites, Tools and Parts Required

Installation Prerequisites

Installation Prerequisites

Consider the following prerequisites before installing your Content Engine.

Tools and Parts Required

A sliding rail rack-mount kit and cable management assembly are included in your shipping container accessory box. The rack-mount kit is suitable for mounting Content Engine 510 and 565 units in 19-inch (48.26-cm) 4-post equipment racks.

Note A 2-post rack-mounting option contains angle brackets for attaching the chassis to a 2-post rack.

You need the following tools for the installation:

•Flat-blade screwdriver

•Phillips screwdriver

Figure 5 shows the parts that you need to install the Content Engine in an equipment rack. If any parts are missing or damaged, contact your place of purchase.

Figure 5 Rack Installation Kit

7

1

2

3

4

5

6

83198

Installing the Cisco Content Engine 510 and 565

78-14731-02 9