Cisco Systems 520 series manual Tftp Download Command Variables, Variable Command

Appendix C ROM Monitor

Disaster Recovery with TFTP Download

TFTP Download Command Variables

This section describes the system variables that can be set in ROM monitor mode and that are used during the TFTP download process. There are both required variables and optional variables.

Note The commands described in this section are case sensitive and must be entered exactly as shown.

Required Variables

These variables must be set with these commands before you use the tftpdnld command:

Variable	Command
IP address of the router.	IP_ADDRESS= ip_address
Subnet mask of the router.	IP_SUBNET_MASK=
	ip_address
IP address of the default gateway of the	DEFAULT_GATEWAY=
router.	ip_address
IP address of the TFTP server from which the	TFTP_SERVER= ip_address
software will be downloaded.
Name of the file that will be downloaded to	TFTP_FILE= filename
the router.

Optional Variables

These variables can be set with these commands before using the tftpdnld command:

Variable		Command
Configures how the router displays file download progress.		TFTP_VERBOSE= setting
0—No progress is displayed.
1—Exclamation points (!!!) are displayed to indicate file download
progress. This is the default setting.
2—Detailed progress is displayed during the file download process; for
example:
•	Initializing interface.
• Interface link state up.
•	ARPing for 1.4.0.1
• ARP reply for 1.4.0.1 received. MAC address 00:00:0c:07:ac:01

Cisco Secure Router 520 Series Software Configuration Guide

C-4 OL-14210-01