Cisco Systems 78-11424-03 manual Unpacking an ArrowPoint Distribution Image ADI, 2-11

Chapter 2 Configuring User Profiles and CSS Parameters

Boot Configuration Mode Commands

Unpacking an ArrowPoint Distribution Image (ADI)

Use the unpack command to unpack the ArrowPoint Distribution Image (ADI) on the CSS disk. Enter the ADI filename as an unquoted text string with a maximum length of 32 characters. For example, enter:

(config-boot)#unpack ap0500002.adi

Note Before unpacking the ADI, you must first copy the ADI to the CSS disk. Use the copy ftp ftp_record filename boot-imagecommand to copy the ADI to the CSS disk.

Removing an ArrowPoint Distribution Image (ADI)

Use the remove command to remove an ArrowPoint Distribution Image (ADI) that is not currently running on the CSS. To display a list of ADIs installed on your CSS, enter remove ?. To display the ADI you are currently running, use the version command.

Enter the ADI filename as an unquoted text string with a maximum length of 32 characters.

For example, to remove an ADI, enter:

(config-boot)#remove ap0410008

Specifying the Primary BOOT Configuration

Use the primary command to specify the primary boot configuration. The options for this boot mode command are:

•primary boot-file- Specify the primary boot file

•primary boot-type- Specify the primary boot method, local disk, using FTP, or a network-mounted file system using FTP

•primary config-path- Specify the path to a network CSS configuration

Refer to the following sections for more information on these options and associated variables.

	Cisco Content Services Switch Basic Configuration Guide
78-11424-03		2-11