Chapter 2 Configuring User Profiles and CSS Parameters
Configuring the Command Scheduler
Configuring the Command Scheduler
Use the
For example, you can use this command to schedule periodic content replication, the gathering of statistics, and scheduled configuration changes. At the specified time, the command scheduler executes a command string by creating a
Note To terminate the execution of a command string, use the disconnect command.
The syntax and options for this global configuration mode command are:
•
•cmd-sched record name minute hour day month weekday “ commands...”
{logfile_name} - Create a configuration record for the scheduled execution of any CLI commands, including the playing of scripts.
The variables are listed below. When entering minute, hour, day, month, and weekday variables, you may enter a single integer, a wildcard (*), a list separated by commas, or a range separated by a dash
•name - The name of the configuration record. Enter an unquoted text string up to 16 characters.
•minutes - The minute of the hour to execute this command. Valid numbers are from 0 to 59.
•hour - The hour of the day. Valid numbers are from 0 to 23.
•day - The day of the month. Valid numbers are from 0 to 31.
•month - The month of the year. Valid numbers are from 1 to 12.
•weekday - The day of the week. Valid numbers are from 1 to 7. Sunday is 1.
|
| Cisco Content Services Switch Basic Configuration Guide |
|
|
|
|
| ||
|
|
|
| |
|
|
|