Cisco Systems 78-11424-03 manual Configuring Terminal Idle, Configuring Terminal Length

Chapter 2 Configuring User Profiles and CSS Parameters

Configuring User Profiles

The options for this command are:

•terminal idle - Set the session idle timer.

•terminal length - Set the terminal screen output length.

•terminal more - Enable terminal more support. The default is enabled.

•terminal netmask-format- Control subnet mask display.

•terminal timeout - Set the session maximum login time.

Configuring Terminal Idle

To set the time a session can be idle before the CSS terminates a console or Telnet session, use the terminal idle command. The default value is 0 (disabled). This command is available at the User and SuperUser prompts. Enter an idle time between 0 and 65535 minutes.

To set a terminal idle time, enter:

#terminal idle 15

To revert the terminal idle time to its default of disabled, enter:

#no terminal idle

Configuring Terminal Length

To set the number of output lines the CLI displays on the terminal screen, use the terminal length command. This command is available at the User and SuperUser prompts. Enter the number of lines you want the CLI to display from 2 to 65535. The default is 25 lines.

To set the line number to 35, enter:

#terminal length 35

To set the number of lines to the default of 25 lines, enter:

#no terminal length

	Cisco Content Services Switch Basic Configuration Guide
2-4	78-11424-03