Cisco Systems 78-11424-03 manual Specifying the Secondary Boot Configuration, 2-14

Chapter 2 Configuring User Profiles and CSS Parameters

Boot Configuration Mode Commands

Specifying the Secondary Boot Configuration

Use the secondary command to specify the secondary boot configuration. The secondary boot configuration is used when the primary configuration fails. The options for this boot mode command are:

•secondary boot-file- Specify the secondary boot file

•secondary boot-type- Specify the boot method, local disk or FTP

•secondary config-path- Specify the path to a network configuration using

FTP

For more information on these options and associated variables, refer to the following sections.

Specifying the Secondary Boot-File

Use the secondary boot-filecommand to specify the secondary boot file that the CSS uses when the primary boot configuration fails. Enter the boot file as an unquoted text string with no spaces and a maximum length of 64 characters.

To specify the secondary boot filename, enter:

(config-boot)#secondary boot-file ap0410008

To display a list of secondary boot filenames, enter:

(config-boot)#secondary boot-file ?

To remove the secondary boot file, enter:

(config-boot)#no secondary boot-file

	Cisco Content Services Switch Basic Configuration Guide
2-14	78-11424-03