Cisco Systems AIRCAP3602ITK9, AIRCAP3602IAK9RF, AIRCAP3602EAK9, AIRCAP3602ISK9 20A. Statement

Models: AIRCAP3602ISK9 AIRCAP3602EAK9 AIRCAP3602IAK9RF AIRCAP3602ITK9

1 40
Download 40 pages 31.6 Kb
Page 4
Image 4
20A. Statement 1005

Warning

Warning

Warning

Warning

Caution

Caution

Note

Note

4

Installation of the equipment must comply with local and national electrical codes. Statement 1074

This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than:

20A. Statement 1005

Do not operate your wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be especially qualified for such use. Statement 245B

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332

The fasteners you use to mount an access point on a ceiling must be capable of maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4 indented holes on the mounting bracket.

This product and all interconnected equipment must be installed indoors within the same building, including the associated LAN connections as defined by Environment A of the IEEE 802.af Standard.

The access point is suitable for use in environmental air space in accordance with section 300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power injector in air handling spaces.

Use only with listed ITE equipment.

Page 4
Image 4
Cisco Systems AIRCAP3602ITK9, AIRCAP3602IAK9RF, AIRCAP3602EAK9, AIRCAP3602ISK9 specifications 20A. Statement