Note The color coding of the DC-input power supply leads depends on the color coding of the DC power source at your site. Typically, green or green/yellow is used for ground. Make certain the lead color coding you choose for the DC-input power supply matches lead color coding used at the DC power source.

Warning

When you install the unit, the ground connection must always be made first and disconnected last.

Figure 13 Cisco ASR 1002 Router DC Power Supply

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

OUTPUT

 

 

 

 

 

 

 

 

FAIL

INPUT

FAN

 

 

 

 

OK

OK

 

 

 

 

 

 

 

 

This

 

 

 

 

 

 

 

one

unit might

have more

 

 

power

 

than

 

All

 

supply

conne

 

 

connect

ction.

 

 

ions must

 

 

 

 

 

be removed

 

to de-energize

 

 

 

 

 

 

 

the unit.

 

 

3

2

 

 

 

 

-

 

 

48V/-60V

16A

 

 

280290

 

 

 

1

 

 

 

 

 

 

1

Earth ground lead service loop area

3

DC power positive lead

 

 

 

 

 

2

DC power negative lead

4

Power supply standby switch

 

 

 

 

 

Step 2 Ensure that the negative and positive leads are disconnected from the site power source.

Step 3

Using a wire stripper, strip approximately 0.55 inch (14 mm) from the positive, negative, and ground lead.

Step 4

Insert the stripped end of the ground lead all the way into the ground lead receptacle on the DC-input power supply,

 

and tighten the receptacle screw using a 3.5mm flat-blade screwdriver to a torque of 0.5 to 0.6Nm.

Step 5 Insert the stripped end of the positive lead all the way into the positive lead receptacle and tighten the receptacle screw using the same 3.5mm flat-blade screwdriver. Repeat this step for the negative lead.

Step 6 Make sure the entire stripped end of each lead is inserted all the way into its receptacle. If any exposed wire at the stripped end of a lead is visible after inserting the lead into its receptacle, remove the lead from the receptacle, use the wire stripper to cut the stripped end of the lead, and repeat Step 3 through Step 5.

Step 7 After tightening the receptacle screw for the ground, positive, and negative DC-input leads, use a cable tie to secure the three leads to the power supply faceplate.

Step 8 When securing the earth ground, positive, and negative DC-input leads to the power supply faceplate, leave a service loop in the ground lead to ensure that the ground lead is the last lead to disconnect from the power supply if a great deal of strain is placed on all three leads as shown in Figure 13.

Caution Leave a service loop in the earth ground lead to ensure that the earth ground lead is the last lead to disconnect from the power supply if a great deal of strain is placed on all three leads

17

Page 16 Page 18
Page 17
Image 17
Cisco Systems ASR1002 quick start Step
Page 16 Page 18

ASR1002 specifications

Cisco Systems ASR1002: An Overview of Main Features, Technologies, and Characteristics

The Cisco ASR1002 router is part of the Aggregation Services Router (ASR) series, renowned for its flexibility and robustness in handling a wide variety of enterprise and service provider applications. Designed for high performance and scalability, the ASR1002 delivers advanced routing capabilities while ensuring efficient resource utilization and minimal operational costs.

One of the standout features of the ASR1002 is its modular architecture. The router supports an extensive range of interfaces and services, allowing organizations to tailor the device to their specific networking requirements. With up to 2GB of onboard memory and the ability to support various WAN technologies, the ASR1002 is well-equipped to handle demanding data workloads.

The ASR1002 offers a performance of up to 2 Gbps of throughput, making it suitable for small to mid-sized businesses needing reliable internet access and robust connectivity. It supports Cisco's Advanced IP Services and offers secure and scalable VPN solutions, enabling organizations to connect multiple sites securely and efficiently.

In addition to its high-speed capabilities, the ASR1002 incorporates advanced security features including Integrated Threat Control, which utilizes Cisco's extensive security technologies to safeguard corporate networks from external and internal threats. It also supports firewall services, intrusion prevention, and secure access protocols, ensuring comprehensive security coverage.

The ASR1002 employs advanced routing technologies like multi-protocol label switching (MPLS) and Border Gateway Protocol (BGP), enabling effective traffic management and seamless integration into existing network infrastructures. This versatility makes it an ideal choice for organizations looking to improve network efficiency and effectiveness.

Another critical characteristic of the ASR1002 is its environmental efficiency. The router is designed with power-saving features and optimizes cooling, contributing to reduced energy costs. With its compact form factor, the ASR1002 can be deployed in various environments without taking up significant space.

Overall, the Cisco ASR1002 stands out as a highly capable and adaptable router, blending advanced features, robust performance, and secure networking capabilities. It caters to the evolving needs of modern enterprises, enabling seamless connectivity and enhancing network reliability. Whether for a small business or a larger enterprise branch, the ASR1002 provides an optimized solution for contemporary networking challenges.
Top Page Image Contents