Cisco Systems ATA187I1ARF manual Configuring Product Specific Configuration Parameters

Chapter 4 Configuring the ATA 187

Configuring Product Specific Configuration Parameters

Configuring Product Specific Configuration Parameters

Cisco Unified Communications Manager Administration allows you to set some product specific configuration parameters for the ATA 187. Table 4-2lists the configuration windows and their paths to configure the parameters.

Table 4-2 Configuration Information

Configuration Window	Path
Enterprise Phone	System > Enterprise Phone Configuration
Configuration window
Common Phone Profile	Device > Device Settings > Common Phone Profile
window
Phone Configuration window	Device > Phone; Product Specific Configuration portion of window

Table 4-3lists the configuration parameters you can set using Cisco Unified Communications Manager Administration.You can set the configuration parameters using any of the three configuration windows listed in Table 4-2.

When you set the parameters, select the Override Common Settings check box for each setting you wish to update. If you do not check this box, the corresponding parameter setting does not take effect.

Note Some ATA 187 parameters are set from port 1 only. Setting the parameters from port 2 will have no effect. Set the following parameters from port 1 only—IVR Password, Phone Load Name, CDP, and Web Access.

Table 4-3	Configuration Parameters for the ATA 187
Parameter		Description
Auto Barge		Auto Barge adds a user to an active call. An offhook phone
		automatically adds the user (initiator) to the shared line call
		(target), and the users currently on the call receive a tone (if
		configured). Barge supports built-in conference and shared
		conference bridges.
		The Auto Barge feature allows the user to go offhook and be
		added to the call. The Auto Barge feature supports built-in
		conferences and shared conference bridges.
Call Sequence		•	Bellcore FSK
		•	ETSI FSK
Callee Connect Polarity		• User forward polarity while callee is connected
		• User reverse polarity while callee is connected
Callee Disconnect Polarity		• User forward polarity while callee is disconnected
		• User reverse polarity while callee is disconnected
Caller Connect Polarity		• User forward polarity while caller is connected
		• User reverse polarity while caller is connected

Cisco ATA 187 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)

OL-21862-01 4-5