Table
Message | Causes | Corrective Actions |
|
|
|
No boot sector on hard | Incorrect configuration settings in | Check the |
drive | System Setup program, or no | settings in the System Setup program. |
| operating system on hard drive. | See "Using the System Setup Program" |
|
| on page 31. If necessary, install the |
|
| operating system on your hard drive. See |
|
| your operating system documentation. |
|
|
|
No timer tick interrupt | Faulty system board. | See "Getting Help" on page 129. |
|
|
|
Not a boot diskette | No operating system on diskette. | Use a bootable diskette. |
|
|
|
PCIe Degraded Link Width | Faulty or improperly installed PCIe | Reseat the PCIe card in the specified |
Error: Embedded | card in the specified slot. | slot number. See "Installing an |
Bus#nn/Dev#nn/Funcn |
| Expansion Card" on page 53. If the |
Expected Link Width is n |
| problem persists, see "Getting Help" on |
| page 129. | |
Actual Link Width is n |
| |
|
| |
|
|
|
PCIe Degraded Link Width | Faulty or improperly installed PCIe | Reseat the PCIe card in the specified |
Error: Slot n | card in the specified slot. | slot number. See "Installing an |
Expected Link Width is n |
| Expansion Card" on page 53. If the |
| problem persists, see "Getting Help" on | |
Actual Link Width is n |
| |
| page 129. | |
|
| |
|
|
|
PCIe Fatal Error caused a | Faulty or improperly installed PCIe | Reseat the PCIe card in the specified |
system reset: Slot n | card in the specified slot. | slot number. See "Installing an |
or |
| Expansion Card" on page 53. If the |
| problem persists, see "Getting Help" on | |
Embedded |
| |
| page 129. | |
Bus#nn/Dev#nn/Funcn |
| |
|
| |
Please check the system |
|
|
event log for details. |
|
|
|
|
|
PCI BIOS failed to install | PCI device BIOS (Option ROM) | Reseat the expansion cards. Ensure that |
| checksum failure is detected during | all appropriate cables are securely |
| shadowing. Loose cables to expansion | connected to the expansion cards. If the |
| card(s); faulty or improperly installed | problem persists, see "Troubleshooting |
| expansion card. | Expansion Cards" on page 113. |
|
|
|
Plug & Play Configuration | Error encountered in initializing PCI | Install the NVRAM_CLR jumper and |
Error | device; faulty system board. | reboot the system. See Figure |
|
| jumper locations. If the problem persists, |
|
| see "Troubleshooting Expansion Cards" |
|
| on page 113. |
About Your System
27
