Dell EMU01 owner manual Installing a Diskette Drive

3Remove the top cooling shroud. See "Removing the Cooling Shrouds" on page 49.

4Locate the VRM sockets. See Figure 6-2.

5Press down and out on the ejectors on each end of the socket and lift the VRM out of the socket. See Figure 3-13.

Installing a Diskette Drive

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Remove the front bezel, if attached. See"Removing and Replacing the Optional Front Bezel" on page 45.

3To remove the drive carrier, pull the release latch forward, then slide the carrier out of the chassis. See Figure 3-14.

Figure 3-14. Removing and Installing the Diskette/Optical Drive Carrier

2

1

1 release latch 2 diskette/optical drive carrier

4Remove the optical drive or optical drive filler plate from the carrier:

a Loosen the thumbscrew on the latch securing the optical drive or filler plate. See Figure 3-15. b Remove the latch.

c Lift the optical drive or optical drive filler plate from the carrier.

68

Installing System Components