Figure 3-3. Removing and Replacing the System Cover

1

2

3

1 latch

2

latch release lock

3

J hooks

Closing the System

1Lift up the latch on the cover.

2Align the cover with the left and right edges of the system and offset it slightly towards the back of the system, so that the pins on the inner edge of the cover are aligned with the chassis J hooks. See Figure 3-3.

3Lower the cover onto the chassis and close the latch.

4Rotate the latch release lock in a clockwise direction to secure the cover.

Installing System Components

47

Page 47
Image 47
Dell EMU01 owner manual Closing the System