Figure 3-8. Installing or Removing an Expansion Card

2

1

3

1

card-edge guide (full-length

2

expansion card

3

expansion-card retainer

 

cards only)

 

 

 

 

7Connect any cables to the expansion card.

If you are installing a RAC card, see "RAC Card" on page 56.

If you are installing a SAS controller card, see "Installing a SAS Controller Card" on page 76.

8Close the system. See "Closing the System" on page 47.

Removing an Expansion Card

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 46.

Installing System Components

55

Page 55
Image 55
Dell EMU01 owner manual Removing an Expansion Card, Expansion card, Cards only