Dell EMU01 Remove the system board, Lift the system board out of the chassis, left side first

Figure 3-29. Removing and Installing the RAID Battery Compartment

2

1

3

1 securing tabs (2) 2 securing slots (2) 3 RAID battery compartment

13Remove the system board:

a Pull up the spring-loaded blue retention pin located in the center of the system board, and then slide the system board toward the front of the chassis until it stops. See Figure 3-30.

b Slowly and evenly lift the system board above the retention hooks, ensuring that the system board is clear of all retention hooks, then evenly lift up the left side of the system board. See Figure 3-30.

c Lift the system board out of the chassis, left side first.

92

Installing System Components