Dell EMU01 owner manual Installing the Control Panel, Display module Display module cable

Figure 3-22. Removing and Installing the Control Panel
2	3	4
1		5

7

6

3

1	display module	2	display module cable	3	control panel board
4	control panel board cable	5	control panel board screws (3)	6	display module label
7	display module screws (2)

Installing the Control Panel

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.

1Insert the control panel assembly display module into the chassis cutout and secure it with the two Torx screws.

2Affix the control panel label to the display module.

3Install the control panel board in the system chassis and secure with the three Torx screws. See Figure 3-22.

4Connect the display module cable to the control panel board. See Figure 3-22.

5Connect the control panel cable to the control panel board and secure the cable in the cable guides on the chassis.

Installing System Components

81