Figure 3-20. Installing the RAID Battery

2

1

3

1 RAID battery

2

RAID battery cable

3

RAID controller card

Connecting an External SAS Tape Drive

This subsection describes how to connect an external SAS tape drive to the optional external SAS controller card.

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 46.

3Ground yourself by touching an unpainted metal surface on the back of the system and unpack the drive.

4Unpack the tape drive and controller card.

Installing System Components

77

Page 77
Image 77
Dell EMU01 owner manual Connecting an External SAS Tape Drive