Figure 3-5. Removing and Replacing the Cooling Shrouds
| 2 |
1 | 3 |
|
4
5
|
|
|
| 6 |
|
1 | left cooling shroud | 2 | finger holes | 3 | right cooling shroud |
4 | top cooling shroud | 5 | guide | 6 | slot |
Replacing the Cooling Shrouds
1Slowly lower the left shroud straight down into the system. The guides on the edges of the shroud fit into the corresponding slots in the sides of the chassis. See Figure
2Gently press down on the shroud until it is fully seated.
3Install the right shroud.
4Install the top shroud.
50
