HTC Diamond2 user manual Installing the SIM Card, Battery, and Storage Card, SIM card

Getting Started  27

1.3  Installing the SIM Card, Battery, and Storage Card

You need to remove the back cover before you can install the SIM card, battery, and storage card. Also, make sure to always turn off the power before installing or replacing the SIM card and battery.

To remove the back cover

1. Make sure your phone is turned off.

2. Firmly hold the phone with both hands and the front panel facing down.

3.Push the back cover up with your thumbs until it disengages from the

phone and then slide it up to remove.

SIM card

The SIM card contains your phone number, service details, and phonebook/ message memory. Your phone supports both 1.8V and 3V SIM cards.

Note Some legacy SIM cards may not function with your phone. You should consult with your service provider for a replacement SIM card. There may be fees for this service.

To install the SIM card
1.	Remove the battery if it is installed.
2.	Locate the SIM card slot, then insert
	the SIM card with its gold contacts
	facing down and its cut-off corner
	facing out the card slot.
3.	Slide the SIM card completely into	Cut-off
	the slot.
		corner