HTC Diamond2 user manual Using Car Kit Phones

58  Using Phone Features

2.7  Using Car Kit Phones

Bluetooth car kit phones that support the SIM Access Profile (SAP) can connect to your phone and access its SIM card via Bluetooth. Once a SAP connection has been established, you can download phone and/or SIM contacts from your phone to the car kit phone, and use the car kit phone to answer and make calls.

1.On your phone, make sure that Bluetooth is turned on and set to visible mode. For information about turning on Bluetooth and enabling visible mode, see Chapter 9.

2.On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > SIM Access tab.

3.Select the Remote SIM Access check box, and then tap OK.

4.Connect the car kit phone to your phone via Bluetooth. To learn how to connect, consult your car kit phone’s manual.

5.If this is the first time you are pairing the car kit phone with your phone, enter the car kit phone’s passcode on your phone.

6.A pop-up message should appear on your phone saying that a connection has been established between your phone and car kit phone. Tap OK.

Note You are not able to make and receive calls, send and receive messages, or perform related activities on your phone when the SIM Access Profile connection is active. You’ll be able to make or receive calls from the car kit phone during this time. After the connection is disconnected, you will be able to use your phone as before.