30  Getting Started

1.4  Charging the Battery

New batteries are shipped partially charged. Before you start using your phone, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles.

Note Only the AC adapter and USB sync cable provided with your phone must be used to charge the phone.

Connect the USB connector of the AC adapter to the sync connector on your phone, and then plug in the AC adapter to an electrical outlet to start charging the battery.

Charging is indicated by a solid amber light on the Notification LED. As the battery is being charged while the phone is on, a charging icon also appears in the title bar of the Home screen. After the battery has been fully charged, a full battery icon

appears in the title bar of the Home screen.

Warning!

Do not remove the battery from the phone while you are charging it using

 

the AC or car adapter.

 

As a safety precaution, the battery stops charging before it overheats.

1.5  Starting Up

After installing your SIM card and battery and charging the battery, you can now power on and start using your phone.

Turning your phone on and off

To turn on the phone Press the POWER button.

When you turn on your device for the first time, Windows Mobile starts up and prepares your device for first time use. When the preparation process is complete, the subsequent screen prompts you to choose whether to import SIM contacts to your device. See “Importing SIM contacts” for details.

Page 30
Image 30
HTC Diamond2 Charging the Battery, Starting Up, Turning your phone on and off, Appears in the title bar of the Home screen