Q-Logic 59060-02 B manual A1003.002F SW2 Zoning Not Supported by other switch, Isolating link

3 – Event Messages Alarm Events

S

(A1003.002D) (Zone Merge response indicates failure to merge, Isolating link)

Meaning:	The attempt to merge two fabrics failed because each active zone
	set contained a zone with the same name, but different
	membership.
Action:	Edit the affected zone to remove the conflict or deactivate one of
	the zone sets.

(A1003.002F) (SW2 Zoning Not Supported by other switch, Isolating link)

Meaning:	The inter-switch link isolated because the local switch is configured
	for FC-SW-2 compliant zoning (interoperability mode set to
	Standard), but the remote switch is not.
Action:	Set the interoperability mode on the remote switch to Standard.
(A1003.002E) (Zoning merge has been rejected.)
Meaning:	The attempt to merge two fabrics failed because each active zone
	set contained a zone with the same name, but different
	membership.
Action:	Edit the affected zone to remove the conflict or deactivate one of
	the zone sets.
(A1003.0030) (Zone Merge rejected by remote switch.)
Meaning:	The zone merge failed.
Action:	See the switch log for more details on why the merge failed.
(A1003.0031) (Error reading zoneset from activate direct.)
Meaning:	A device supporting management server has sent an Activate
	Zoneset Direct $(AZSD) command that did not follow the expected
	standard layout.
Action:	Contact your authorized maintenance provider.

(A1003.0032) (Zoneset zone_set_name failed validity checks (empty or contains empty zone/alias))

Meaning:	The zone set either has no zones or contains a zone or alias
	without members.
Action:	Add zones and members, or remove the empty zones and aliases
	from the zone set.

(A1003.0033) (No memory for command completion)

Meaning:	Insufficient switch memory.
Action:	Contact your authorized maintenance provider.

3-6 59060-02 B