Q-Logic 59060-02 B manual C 8400.006A Switch Upgrading License for Fabric Security

The port will perform a link reset (LR) due to loss of credit issue.

The port will perform a link reset (LR) due to loss of credit issue.

The port will perform a link reset (LR) due to loss of credit issue.

A

3 – Event Messages Critical Events

(C)(8400.0069) (Switch) (Warning-When leaving the Diagnostics AdminState of the primary CPU blade, an automatic reset of the blade will occur. The blade and the switch will come back up in the configured AdminState.)

Meaning:	The primary CPU blade is entering Diagnostics state and will
	automatically undergo a hard reset. The I/O blade will return to the
	configured administrative state after leaving the Diagnostics
	administrative state.

(C) (8400.006A) (Switch) (Upgrading License for Fabric Security)

Meaning: The Fabric Security Bundle license was applied successfully.

(C) (8400.006B) (Switch) (Upgrading License for CLI Extended Credits capability)

Meaning: The CLI Extended Credits license was applied successfully.

(C)(8600.0009) (PortApp) (Port: port_number) (Link reset (LR) to be performed on port port_number.)

Meaning:

(C)(8600.000A) (PortApp) (Port: port_number) (Link reset (LR) to be performed on port port_number.)

Meaning:

(C)(8600.000B) (PortApp) (Port: port_number) (Link reset (LR) to be performed on port port_number.)

Meaning:

(C) (8600.0013) (PortApp) (Invalid vendor data from media device for port port_number)

Meaning:	The switch could not read and verify the media module ID. This
	may indicate a discovery error or a bad checksum in the serial ID.
	Other possibilities include an improperly installed media module or
	an internal media I/O hardware fault.

(C) (8600.0014) (PortApp) (Invalid vendor data from media device for port port_number)

Meaning:	Switch could not read and verify the media module ID. This could
	be caused by a media discovery error, a bad checksum in the
	media serial ID, an improperly installed media, or an internal media
	I/O hardware fault.

(C)(8600.0015) (PortApp) (Unresponsive device alpa on port port_number removed from the fabric.)

Meaning:	A device on the loop port did not take a OPN off the loop destined
	for it. This suggests either the device has been physically removed
	or is faulty. It has been removed from the fabric nameserver.

59060-02 B 3-39