Q-Logic 59060-02 B manual An EPort isolated because the values for RATOV or EDTOV

Models: 59060-02 B

1 62
Download 62 pages 21.93 Kb
Page 26
Image 26
An E_Port isolated because the values for R_A_TOV or E_D_TOV

3 – Event Messages Alarm Events

S

(A1004.0023) (Attempting to connect to switch with incompatible time out value configured (R_A_TOV/E_D_TOV).)

Meaning:

An E_Port isolated because the values for R_A_TOV or E_D_TOV

 

are not the same on both switches.

Action:

Modify the switches so that the time out values are the same.

(A1004.0024) (Attempting to connect to switch that is in non-interop mode)

Meaning:

An attempt was made to connect to a switch with a different value

 

for Interop Mode.

Action:

Modify the Interop Mode values so that they are the same on both

 

switches.

(A1004.0026) (Configured Domain ID domain_ID not available and Domain ID is locked on this switch)

Meaning:

An attempt was made to connect a switch to a fabric with a

 

conflicting domain ID and the domain ID could not be reassigned.

Action:

Change the domain ID so that it is unique in the fabric or disable

 

the domain ID lock so that the domain ID can be automatically

 

reassigned.

(A1004.0029) (No Switch capable of being Principal Switch. Reconfigure Principal Switch Priority.)

Meaning:

An E_Port isolated because the principal priority on all switches is

 

set to 254.

Action:

Configure one of the switches to be the principal switch by

 

changing the principal priority.

(A1004.002B) (Port port_number not configured for E-Port capability, reconfigure to G/GL to connect to remote switch)

Meaning:

An attempt was made by a remote switch to connect through a port

 

that could not configure itself as an E_Port.

Action:

Change the port type on the remote switch to G_Port or GL_Port.

(A1004.002D) (Non-interop Legacy switch setting prevents domain/port zoning)

Meaning:

Zone members involving switches of other vendors cannot be

 

defined by domain ID and port number when Interop Mode is

 

disabled and Legacy Address Formatting is enabled.

Action:

Disable (False) the Legacy Address Formatting, enable Interop

 

Mode, or reassign the zone members using a method other than

 

domain ID and port number.

3-14

59060-02 B

Page 26
Image 26
Q-Logic 59060-02 B manual An EPort isolated because the values for RATOV or EDTOV