Q-Logic 59060-02 B manual I 8200.0201 mserver Rejecting request commandcommand

A

3 – Event Messages Informative Events

(I)(8200.0200) (mserver) (Rejecting request (GZM) for zone zone_name containing unsupported alias member(s)

Meaning:	The fabric zone server command GZM (Get Zone Member) was
	rejected because the requested zone member was an alias which
	is not defined in GS-3.

(I) (8200.0201) (mserver) (Rejecting request command:command)

Meaning:	A fabric zone server command was rejected for the reason detailed
	in the message. This can be caused by two users attempting to
	configure the switch or zoning database at the same time. Contact
	your authorized maintenance provider if the reason for the failure is
	not clear.

(I)(8200.0202) (mserver) (Rejecting request (GZS) for zone set zone_set_name containing unsupported alias member(s))

Meaning:	The fabric zone server command GZS (Get Zone Set) was rejected
	because the requested zone set contains one or more members
	that are aliases. Since aliases are not defined in GS-3, the request
	could not be completed.

(I)(8200.0300) (mserver) (Cannot register HBA World Wide Name (WWN) device_WWN,

FDMI database has reached its configured limit.)

Meaning:	The switch contains a database that is configured to allow a certain
	number of HBAs to register Fabric Device Management Interface
	(FDMI) information with this switch. An HBA has attempted to
	register its FDMI information with the switch, but allowing it to do so
	would cause the FDMI database to exceed the configured limit.

(I)(8200.0301) (mserver) (Port: port_number) (Rejecting FDMI request from address FC_address on port port_number; FDMI is configured as disabled.)

Meaning:	The Fabric Device Management Interface (FDMI) server on this
	switch has been configured disabled so any FDMI requests
	received by the switch will be rejected.

(I) (8300.0004) (zoning) (New Active ZoneSet zone_set_name)

Meaning: A new zone set has been activated.

(I) (8300.0007) (zoning) (Fabric lock held by domain domain_ID, hotreset not permitted)

Meaning:	Another switch has acquired our fabric zoning lock. Zoning request
	is about to occur. Retry hotreset after fabric zoning lock is released.

(I) (8300.0008) (zoning) (Processing zoning requests, Checkpoint not permitted)

Meaning:	Another switch has acquired our fabric zoning lock. Zoning request
	is about to occur. Retry hotreset after fabric zoning lock is released.

59060-02 B 3-45