Q-Logic 59060-02 B manual The switch with the specified worldwide name is not allowed to join

A

3 – Event Messages Alarm Events

(A1004.002F) (Request for Domain ID rejected, WorldWide Name (WWN) device_WWN not allowed to join fabric.)

Meaning:	The switch with the specified worldwide name is not allowed to join
	the fabric.
Action:	Add the switch to a group in the active security set.

(A1004.0030) (Topology change, lost route to switch with domain ID domain_ID)

Meaning:	Connection was lost to a switch in the fabric.
Action:	Inspect switch connections and device hardware for proper
	operation. Review accompanying alarms for other causes.

(A1004.0032) (E_Port not supported on remote port. Reconfigure remote switch to connect.)

Meaning:	An E_Port isolated because the port on the remote switch could
	not configure itself as an E_Port.
Action:	Change the port type on the remote switch to G_Port or GL_Port.

(A1004.0033) (Remote switch is in Interop mode or using Legacy Address Format)

Meaning:	A remote switch is attempting to connect with conflicting settings
	for Interop mode or legacy address format.
Action:	Configure the switches so that Interop mode and Legacy Address
	Format settings are the same throughout the fabric.

(A1004.0034) (Failed to connect to a switch due to incompatibility - contact technical support.)

Meaning:	The two switches are incompatible. Possible causes include
	incompatible interoperability mode configurations, incompatible
	firmware versions, and incompatible licensing.
Action:	Check interoperability mode settings, firmware versions, and
	licensing on the remote switch. Otherwise, contact your authorized
	maintenance provider.

(A1004.0035) (Failed to connect to a switch due to incompatibility - check interop settings.)

Meaning:	The remote switch failed to connect possibly because the
	interoperability mode setting is different than that of the local
	switch.
Action:	Reconcile the interoperability mode settings on the local and
	remote switch so that they are the same. Otherwise, contact your
	authorized maintenance provider.

59060-02 B 3-15