Q-Logic 59060-02 B manual A1007.0030 Security protocol not using chap, unable to authenticate

A

3 – Event Messages Alarm Events

(A1007.002D) (Ignoring RADIUS Server RADIUS_server, invalid UDP port configured)

Meaning:	A RADIUS server was configured with invalid data for the UDP
	port. This is a required configuration field for the RADIUS server to
	be used.
Action:	Set the UDP port value in the switch RADIUS server configuration
	using the Set Setup Radius command.

(A1007.002E) (Ignoring RADIUS Server RADIUS_server, zero timeout configured)

Meaning:	A RADIUS server was configured with invalid data for the timeout
	value. This is a required configuration field for the RADIUS server
	to be used.
Action:	Set the timeout value in the switch RADIUS server configuration.
	using the Set Setup Radius command.

(A1007.002F) (Ignoring RADIUS Server RADIUS_server, no shared secret is configured)

Meaning:	A RADIUS server was configured with invalid data for the shared
	secret. This is a required configuration field for the RADIUS server
	to be used.
Action:	Set the shared secret in the switch RADIUS server configuration.
	using the Set Setup Radius command.

(A1007.0030) (Security protocol not using chap, unable to authenticate.)

Meaning:	A CHAP Negotiate frame was received that specifies an
	unsupported Dilfie Helmann (DH) Group type.
Action:	Check the remote device for a possible error condition. Reset the
	port to retry again. If errors continue, disable CHAP for this device
	if it belongs in the fabric.

(A1007.0031) (Security protocol not using chap, unable to authenticate.)

Meaning:	A CHAP Negotiate frame was received that specified an
	unsupported hashing algorithm or an algorithm that is not allowed
	for this security member's configuration.
Action:	Check the remote device for a possible error condition. Reset the
	port to retry again. If errors continue, disable CHAP for this device
	if it belongs in the fabric.

59060-02 B 3-27