Q-Logic 59060-02 B manual A1003.000C Fabric Busy, failing lock request from domain domainID

Models: 59060-02 B

1 62
Download 62 pages 21.93 Kb
Page 14
Image 14
(A1003.000C) (Fabric Busy, failing lock request from domain domain_ID)

3 – Event Messages Alarm Events

S

(A1003.000B) (Failing release of fabric lock held by switch with domain domain_ID)

Meaning:

The local switch is locked as the result of zoning changes being

 

made by a remote switch.

Action:

Wait for the lock to time out and try again.

(A1003.000C) (Fabric Busy, failing lock request from domain domain_ID)

Meaning:

The command failed because the fabric is busy with another

 

command in progress.

Action:

Retry the command in 10 seconds.

(A1003.000D) (Fabric already locked by domain domain_ID)

Meaning:

The switch given by the domain_ID has locked the fabric.

Action:

Unlock the domain_ID lock on the switch given by domain_ID.

(A1003.000E) (Couldn't acquire lock from domain domain_ID)

Meaning:

Fabric may be changing, and therefor could not acquire the lock.

Action:

Wait for the fabric to stabilize, then try again.

(A1003.0010) (Segmenting, zoneset zone_set_name not defined)

Meaning:

In non-interop mode, there is a conflict in the zoning configuration,

 

causing the Inter-Switch Link (ISL) to isolate. The zone set is not

 

found within the local zoning data base while interop mode is

 

disabled.

Action:

Contact your authorized maintenance provider.

(A1003.0011) (Segmenting, zoneset zone_set_name already active)

Meaning:

In non-interop mode, there is a conflict in the zoning configuration,

 

causing the Inter-Switch Link (ISL) to isolate. A switch tried to

 

activate a zone set that is already active while interop mode is

 

disabled.

Action:

Contact your authorized maintenance provider.

(A1003.0012) (Segmenting, zoneset zone_set_name merge conflict)

Meaning:

In non-interop mode, there is a conflict in the zoning configuration,

 

causing the Inter-Switch Link (ISL) to isolate. After a zone merge

 

with interop mode disabled, two zone sets were discovered in the

 

local zoning database with the same name, but different

 

membership.

Action:

Contact your authorized maintenance provider.

3-2

59060-02 B

Page 14
Image 14
Q-Logic 59060-02 B manual A1003.000C Fabric Busy, failing lock request from domain domainID