Q-Logic 59060-02 B manual A1006.0005 Zoning enforcement error in Nameserver

A

3 – Event Messages Alarm Events

(A1005.0045) (Configured port data conflicting within hardware capabilities)

Meaning:	Configured port settings conflict with the hardware capabilities of
	the port. The ports is downed.
Action:	Reconfigure the port to be compatible with the port hardware.

(A1006.0004) (Zoning conflict, device_WWN is in an ACL hard zone, but device_WWN share a soft zone)

Meaning:	The named zone members cannot communicate because they are
	members of different ACL hard zones.
Action:	Place both zone members in the same ACL hard zone or exclude
	both from ACL hard zones.

(A1006.0005) (Zoning enforcement error in Nameserver)

Meaning:	An error occurred while checking ACL zoning.
Action:	Contact your authorized maintenance provider.

(A1006.0006) (Zoning conflict, device_WWN and device_WWN do not share an ACL hard zone, but device_WWN share a soft zone)

Meaning:	The named zone members cannot communicate because they are
	members of different ACL hard zones.
Action:	Place both zone members in the same ACL hard zone or exclude
	both from ACL hard zones.

(A1007.0001) (NS: Unspecified zoning enforcement error)

Meaning:	A device was not authorized or it failed security checks and will not
	be allowed to join the fabric.
Action:	None.

(A1007.0002) (Security: WWN device_WWN not authorized to join))

Meaning:	The device WWN is either not configured in the security data base,
	or it is not configured for Challenge Handshake Authentication
	Protocol (CHAP).
Action:	Add the device WWN to the active security set if it missing, or
	modify the group to allow for CHAP authentication with the other
	devices.

(A1007.0005) (Security: Authentication request was rejected by port.)

Meaning:	Indicates that a remove switch rejected a security authentication
	attempt. The port will isolate.
Action:	Checks the security configuration on the remote switch to
	determine the problem.

59060-02 B 3-21