Q-Logic 59060-02 B manual A3001.0001 Temp overwarm, sensorname sensor reads value C - ALARM SET

3 – Event Messages Alarm Events

S

(A3000.0002) (Temp sensor sensor_name on blade slot_number reads value C - ALARM

SET)

Meaning:	The chassis temperature has reached a failure threshold.
Action:	Check air flow, fan operation, and ambient temperature. If the
	problem cannot be corrected, power down the switch.

(A3001.0001) (Temp overwarm, sensor_name sensor reads value C - ALARM SET)

Meaning:	The chassis temperature has reached a warning threshold.
Action:	Check air flow, fan operation, and ambient temperature.

(A3002.0001) (sensor name sensor has returned to normal range - ALARM CLEARED)

Meaning:	The chassis temperature has returned to the normal range and the
	alarm condition has been cleared.
Action:	None

(A3002.0002) (Temp sensor sensor_name on blade slot_number reads value C - ALARM

CLEARED)

Meaning:	The named blade has returned to the normal operating
	temperature range.
Action:	None.

(A3003.0001) (Fatal hardware error detected. The switch is not operational. Use 'show post log' for more info)

Meaning:	A fatal hardware error was discovered during the
	Power-On-Self-Test (POST) phase of startup. This switch is not
	currently operational.
Action:	Enter the Show Post Log command to investigate.

(A3003.0002) (POST detected a fatal error the last time it ran. The switch is not operational. Use 'show post log' for more info)

Meaning:	A fatal hardware error was discovered from the previous
	Power-On-Self-Test (POST). This switch is not currently
	operational.
Action:	Enter the Show Post Log command to investigate.

(A3003.0003) (Diagnostics have detected a fatal error on the I/O blade in slot slot_number.

The blade is not operational.)

Meaning:	Diagnostic testing has determined that there is a failure on
	specified I/O blade. The blade did not pass the Power-On-Self-Test
	(POST).
Action:	Enter the Show Post Log command to investigate.

3-30 59060-02 B