Q-Logic 59060-02 B manual A1003.0064 UFC failure received from domain domainID

A

3 – Event Messages Alarm Events

(A1003.0060) (Zone Merge conflict (Alias mismatch for alias= alias, check members)

Meaning:	The zone merge failed due to an alias mismatch.
Action:	Examine the zoning configuration for conflicts.

(A1003.0062) (Failing delete orphans zoning request, fabric locked by switch with domain ID domain_ID. Retry command later.)

Meaning:	An attempt was made to delete the orphan zones while the fabric
	was locked.
Action:	Retry the command later.

(A1003.0063) (Failing delete orphans zoning request, fabric busy. Retry command later.)

Meaning:	An attempt was made to delete the orphan zones while the fabric
	was busy.
Action:	Retry the command later.

(A1003.0064) (UFC failure received from domain domain_ID)

Meaning:	Update Fabric Configuration (UFC) message was received with a
	failed status from the switch given by domain_ID.
Action:	Check the status of the switch at the given domain ID.

(A1004.0001) (Port in active hard zone, but not installed or present on this switch.)

Meaning:	A zone member in an ACL zone on this switch is defined with an
	invalid port number.
Action:	Examine the fabric and correct the zone membership.

(A1004.0005) (No communication from neighbor switch on port port_number with domain ID domain_ID, lost route)

Meaning:	This switch has not received a hello from the remote switch for 80
	seconds. Routes learned through this link are discarded.
Action:	None.

(A1004.0008) (Eport Isolating due to ELP Incompatibility)

Meaning:	An E_Port isolated due to an ELP (Exchange Link Parameter)
	incompatibility.
Action:	Review accompanying alarms for specific cause.

(A1004.0009) (Eport Isolating due to ESC Incompatibility)

Meaning:	An E_Port isolated because the connecting switch failed to support
	the standard routing protocol FSPF.
Action:	Connect a compatible switch.

59060-02 B 3-11