Q-Logic 59060-02 B manual A1003.003C Incompatible Zoning mode, Isolating link

3 – Event Messages Alarm Events

S

(A1003.003B) (Incomplete merge request sequence received, unable to process request.)

Meaning:	A remote switch sent a merge request that was not understood.
Action:	Check the remote switch for configuration errors or equipment
	malfunction.

(A1003.003C) (Incompatible Zoning mode, Isolating link)

Meaning:	The fabric contains switches with a mix of interoperability mode
	settings.
Action:	Configure all switches in the fabric to have the same value for
	interoperability mode.

(A1003.003E) (Security: Ports downed for INVALID_ATTACH require administrative action to be brought online.)

Meaning:	When deactivating a security set, ports that were previously
	downed due to security violations remain down.
Action:	Reset the ports or place the ports online.

(A1003.003F) (ISL group empty and links up. Set ports offline to activate.)

Meaning:	Attempt at activating fabric binding with an ISL group that has no
	members is not allowed due because there are inter-switch links
	(ISL) logged in to the switch.
Action:	Configure all ISLs offline or add each ISL member with fabric
	binding information to the ISL group before activating.

(A1003.0040) (Zone Member type member_type unsupported.)

Meaning:	An invalid zone member type was discovered in a zone. ACL hard
	zone membership must be defined by domain_ID and port number.
Action:	Correct the member type.

(A1003.0041) (Zoning objects which contain Fibre Channel (FC) Address Members not being sent to remote switch on save, not supported in this mode)

Meaning:	An attempt was made to assign a zone member by FC address
	while Interop mode was disabled. When Interop mode is disabled,
	zone membership must be defined by world wide name or
	domain_ID and port number.
Action:	Enable Interop mode or change the zone membership type.

3-8 59060-02 B