Q-Logic 59060-02 B manual C 8400.0005 Switch The switch is now performing a hotreset

Admin authority mode was canceled by another user interface session that had the authority to do so.

3 – Event Messages Critical Events

S

(C) (8400.0005) (Switch) (The switch is now performing a hotreset)

Meaning: Hot reset is in progress.

(C)(8400.0006) (Switch) (Admin mode for user user_name was canceled by user user_name)

Meaning:

(C) (8400.0008) (Switch) (The switch will be reset in several seconds

Meaning:	The switch is being reset as a result of a command from a user
	interface.

(C) (8400.0009) (Switch) (The switch will hardreset in several seconds)

Meaning: A hard reset of the switch is pending.

(C) (8400.000A) (Switch) (The switch will hotreset in several seconds)

Meaning: A hot reset is pending.

(C) (8400.000B) (Switch) (The switch will be shutdown several seconds)

Meaning: The switch will be shutdown several seconds.

(C) (8400.000C) (Switch) (Configuration is being restored - this could take several minutes)

Meaning:	When a complete configuration restore is done on a switch, a
	switch reset follows immediately to place the new configuration in
	effect.

(C) (8400.000D) (Switch) (Attempted feature upgrade of features already installed)

Meaning:	The feature is already installed.
(C) (8400.000E) (Switch) (Upgrading Licensed Ports to number_of_ports)
Meaning:	The number of licensed ports on the switch has been upgraded.

(C)(8400.000F) (Switch) (Attempted Licensed Port upgrade of ports that are already licensed)

Meaning:	The switch has already been upgraded to the number of licensed
	ports.

(C)(8400.0011) (Switch) (The switch will be reset in several seconds due to a config restore)

Meaning: Switch management is processing a config restore command.

(C) (8400.0012) (Switch) (I/O blade in slot slot_number has been inserted into chassis)

Meaning: An I/O blade has been inserted into the chassis.

3-34 59060-02 B