Q-Logic 59060-02 B manual A1004.0011 Eport Isolating due to Remote switch isolated

A

3 – Event Messages Alarm Events

(A1004.0011) (Eport Isolating due to Remote switch isolated)

Meaning:	An E_Port isolated because the remote switch has the same
	domain ID.
Action:	Change the domain ID on one of the switches.
(A1004.0012) (Eport Isolating due to ISL Security)
Meaning:	A remote switch attempted to log in but was rejected because it
	failed to satisfy the ISL group membership requirements.
Action:	Review the ISL group configuration and make the necessary
	corrections to include the remote switch as a member.

(A1004.0013) (Eport Isolating due to all switches incapable of becoming Principal Switch)

Meaning:	An E_Port isolated because the principal priority on all switches is
	set to 254.
Action:	Configure one of the switches to be the principal switch by
	changing the principal priority.

(A1004.0014) (Eport Isolating due to TOV mismatch indicated on ELP)

Meaning:	An E_Port isolated because the R_A_TOV or E_D_TOV time out
	values are different on the two switches.
Action:	Modify the switch configurations so that R_A_TOV or E_D_TOV
	values are the same.
(A1004.0015) (Eport Isolating due to Invalid Attach)
Meaning:	An E_Port isolated because of invalid attachment.
Action:	Check for invalid attachment due to security or authentication
	incompatibility.

(A1004.0020) (R_A_TOV mismatch indicated. Reconfigure to connect to remote switch.)

Meaning:	An E_Port isolated because the R_A_TOV timeout values on the
	two switches do not match.
Action:	Modify R_A_TOV so that it is the same on both switches. The
	recommended value is 10 seconds.

(A1004.0021) (E_D_TOV mismatch indicated. Reconfigure to connect to remote switch.)

Meaning:	An E_Port isolated because the E_D_TOV timeout values on the
	two switches do not match.
Action:	Modify E_D_TOV so that it is the same on both switches. The
	recommended value is 2 seconds.

59060-02 B 3-13