Unpacking the Router
b.Remove the blocking plates from the two front hold-down brackets.
c.Remove the bolts that fasten the two hold-down brackets to the front side of the scissor-jack platform (Figure 7).
Figure 7 | Removing Hold-Down Bracket Bolts from the Scissor-Jack |
| Platform |
| 29939 |
d.Set the hold-down brackets, blocking plates, and bolts safely aside.
Note You must reinstall the empty scissor-jack platform on the pallet before storing it with the remainder of the shipping container so that you can use it later to remove the router from the equipment rack and repackage the router in the event it must be shipped to another site or—if necessary—returned to the factory.
| | Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions | | |
| | |
| 78-16081-02 | | | 13 |
| | |
