Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200

Contents

Getting started

Placing calls

Using directories

In-call features

Settings

User guide

Contact us

Calling participants to add them to an ongoing call (Multiway)

Calling more than one using Multiway is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.

While in a call you may add participants provided that your system permits to do so. Tap Hold to put the ongoing call on hold...

The call will now be transferred to the Multiway server and handled from there. This may take a little while...

... then select, in the usual way, whom to add to the ongoing call.

When everything is ready the Join button will appear. Tap this and the bottom line will change

to read Meeting. This may take a little while.

Since the calls have been transferred to the Multiway server you are still in a point-to-point call, but now with the Multiway server as the far end. This applies to all the other participants as well.

Once you have selected someone, tap Start to begin including this participant in the meeting.

Tap END to disconnect yourself. The other participants must do the same to disconnect themselves from the Multiway server.

D14582.07 User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.

21

www.cisco.com

All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.

Page 21
Image 21
Cisco Systems CTSMX20042K9 manual Calling participants to add them to an ongoing call Multiway