Transferring an ongoing call | Cisco Systems CTSMX20042K9 specs

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200

Contents

Getting started

Placing calls

Using directories

In-call features

Settings

Transferring an ongoing call

This is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.

User guide

Contact us

	If applicable, tap	
	the participant to
	be put on hold ().
	If you are in a call with just
	one, that is not needed.
	Then tap Hold ()

Tap

Contacts

and select whom to transfer to in the usual way.

Tap Transfer.

Tap the participant’s name again.

If you are in a call with more than one, you may also transfer the one on hold to the other participant of the current call. If you do so, you will be disconnected from the call, but the others will stay connected.

D14582.07 User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.	23	www.cisco.com
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.

Image 23

Cisco Systems CTSMX20042K9 manual Transferring an ongoing call, Select whom to transfer to in the usual way

Contents

Use with Cisco TelePresence Touch History Searching Directory Favorites Administrator settings-Call settingsAdministrator settings-Reset What’s in this guide? Getting started As outlined Basics of the Touch ControllerScroll in lists Entering Camera Control will Selfview and camera controlTap Camera control to gain Press Adding a near end camera presetFor the new preset Tap More then tap Tap Update to current position Changing an existing near end camera preset Tap More Then tap Tap the field to the right Removing an existing near end camera preset Backlight compensation improves Tap Camera Control & Settings to openCamera whitebalance, exposure, and backlight compensation Receiving calls Sound mattersRing tones and sounds Do not disturb Placing calls Search or Dial field  Calling someone by entering the URI Searching and calling an entry in any of the lists Entries, if needed Calling an entry in one of the listsThen tap Favorites , Directory , or History Calling more than one Using Favorites Directory and History Searching HistoryDirectory Favorites In-call features MultiSite only Features in a call-an overviewLayout lets you Change the layout Gain access On or off User guide Calling participants to add them to an ongoing call Multiway Receiving another incoming call Features when putting someone on hold Select whom to transfer to in the usual way Transferring an ongoing call Far end camera control in a call only Near end camera control Near end camera presetsUsing Touch Tones Dtmf in a call Sharing contents-conducting presentations Shown Layout controlSpeaks gets Shown in frames Full screen Main frame. Identical sizes Nothing else is Settings Settings Access the Settings as follows Gaining access to the Settings System Information Call Status Camera Control & Settings Ringtone & Sound Settings Administrator settings-Date, Time & Location Administrator settings-Call settings Administrator settings-IP settings for the codec Administrator settings-IP settings for the Touch controller Administrator settings-Pairing Gatekeeper discovery Manual or Automatic Administrator settings-H.323 settingsAn H.323 alias Administrator settings-SIP settings Administrator settings-Provisioning Administrator settings-Multiway Settings Administrator settings-EMC Resilience mode Administrator settings-Reset Contact us