Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents | Getting started | Placing calls | Using directories | Settings |
Administrator settings—Call settings
The Call Settings pane lets you specify:
•Auto Answer On or Off. If you set this to On, the system will respond automatically to incoming calls. Note that the microphone will NOT be muted. If risk of eavesdropping is an issue, you may want to set this setting to Off.
•Auto Answer Delay. Specify the time until your system actually responds to an incoming call.
•Default Call Rate. If your connection has limited capacity you may want to use this setting.
•Max Incoming/Outgoing Bandwidth. You may specify these separately. May come in handy if you are on an asymmetric connection.
•Default Call Protocol. Specify which protocol to use as default.
Note how the settings chosen are indicated. In the example shown, Auto Answer is set to Off.
User guide
Contact us
D14582.07 User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011. | 34 | www.cisco.com |
All contents are copyright © |
