Cisco Systems H.323 appendix Nonprovisionable Data, MML Provisionable Data, System Parameters

Chapter 3 Provisioning the Cisco HSI

H.323 Stack Configuration

Nonprovisionable Data

The parameters in Table 3-5cannot be altered through MML commands.

Table 3-5 Nonprovisionable Data Parameters

H323_SYS	Description
system.manualstart	Present
system.pdlname	Absent
system.delimiter	#FF
ras.gatekeeper	Absent
ras.rasmulticastaddress	224.0.1.41.1718
h245.capabilities.manualoperation	Present
h245.masterslave.manualoperation	Present
q931.manualaccept	Present
q931.earlyH245	Present
q931.autoanswer	Present
q931.manualcallprocessing	Present
q931.h245tunneling	Present

MML Provisionable Data

H.323 System Parameters

The parameters in Table 3-6are required for H.323 stack initialization. To modify the parameters in Table 3-6, use the h323_sys MML name variable for the prov-add, prov-dlt,and prov-edcommands. Stop and restart the application for these changes to take effect.

Note The asterisk (*) after a parameter name in the first column of Table 3-6denotes a mandatory RADVision parameter that has an inbuilt default value if a value is not set in provisioning.

Table 3-6 H.323 System Initialization Parameters

Parameter	Description	Type	Example
maxCalls*	Maximum number of concurrent calls allowed	INTEGER(0, 65535)	2500
maxChannels*	Maximum number of concurrent channels allowed	INTEGER(0, 65535)	2

Q.931 Parameters

	To modify the parameters listed in Table 3-7, use the q931 MML name variable for the prov-add,
	prov-dlt, and prov-ed commands.
	In the following example, the prov-addcommand sets the Q.931 parameter maxCalls to the value 2000.
	Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14		3-11