Cisco Systems H.323 appendix 3-14, Parameter Name, Description, Type, Example

Chapter 3 Provisioning the Cisco HSI

H.323 Stack Configuration

Table 3-8 RAS Parameters (continued)

Parameter Name		Description	Type	Example		Update Type
allowCallsWhenNonReg		If this parameter is present, it	NULL	Not present		Immediate
		allows calls to proceed even
		if gatekeeper registration has
		not been done for the
		PGW 2200.
manualRegistration		If this parameter is present,	NULL	Not present		Stop/Start
		the stack does not perform
		automatic gatekeeper
		registration procedures (it
		waits to be driven by the
		application).
timeToLive		The maximum time (in	INTEGER(1, 65535)	400		Immediate
		seconds) that the registration
		of the PGW 2200 with a
		gatekeeper remains valid.
		The stack reregisters
		periodically.
rasPort*		The number of the port	INTEGER(0, 65535)	0		Start
		receiving all RAS
		transactions for the current
		endpoint. Set this parameter
		to 0 to allow the software to
		look for the available port.
compare15bitRasCrv		If this parameter is present, it	NULL	—		Immediate
		causes the stack to ignore the
		call reference value (CRV)
		MSBit in RAS messages.
maxRetries*		Maximum number of RAS	INTEGER(1, 200)	3		Immediate
		retransmissions.
maxMulticastTTL		Maximum number of	INTEGER(0, 200)	3		Start
		multicast time to live (TTL).
preGrantedArqUse		Choice of direct or routed. If	STRING	direct		Next Call
		direct, the pregranted
		Admission Request (ARQ)
		feature is used for both direct
		and routed calls. If routed,
		the pregranted ARQ feature
		is used only for routed calls.
		If absent, the pregranted
		ARQ is not used.
manualDiscovery.ipAddress		The IP address of a known	STRING	10.70.54.53		Start
		gatekeeper with which an
		endpoint might attempt to
		register.
	Cisco H.323 Signaling Interface User Guide
3-14					OL-4806-01 Rev. A14