Cisco Systems MGX-FRSM-2T3E3, MGX-FRSM-2CT3 manual Adding and Configuring Connections on the AUSM/B

Adding and Configuring Connections on the AUSM/B

cnfupcubr <port.vpi.vci> <enable> <pcr[0+1]> <cdvt[0+1]> <IngPc> <util> <clp_tag>

port.vpi.vci	identifies the connection.
enable	is the enabled/disable for UPC: 1=Disable, 2=Enable.
pcr	is the peak cell rate. Without IMA, the range is:
	T1, 10–3622
	E1, 10–4528
	clear E1, 10–4830
	For IMA, multiply the line rate by the number of links.
cdvt	cdvt[0+1] is the cell delay variation tolerance for cells with
	CLP=[0+1]. The range is 1–250000 micro seconds.
scr	is the peak cell rate. Without IMA, the range is:
	T1, 10–3622
	E1, 10–4528
	clear E1, 10–4830
	For IMA, multiply the line rate by the number of links.
scr_police	specifies the type of scr policing: 1= CLP[0] Cells,
	2=CLP[0+1] cells, and 3=no SCR policing.
mbs	is the maximum burst size: the range is 1–5000 cells.
IngPc	is the percent utilization on the ingress. The range is 1–127. The
	default is 0.
hclp_tag	is the enable for CLP tagging: 1=disable, 2=enable.

Step 3 If the system has the ForeSight feature, use cnfchanfst to configure it.

cnfchanfst <port.vpi.vci> <enable> <fgcra_enable> <ibs> <pcr> <mcr> <icr>

port.vpi.vci	identifies the connection.
enable	is the enabled/disable for the ForeSight feature:
	1=disable, 2=enable.
fgcra_enable	is the enabled/disable for the frame-based generic cell rate
	algorithm: 1=disable, 2=enable.
ibs	is the initial burst size in the range 0–5000 cells.
pcr	is the peak cell rate. Without IMA, the range is:
	T1, 10–3622
	E1, 10–4528
	clear E1, 10–4830
	For IMA, multiply the line rate by the number of links.

Card and Service Configuration 6-17