Cisco Systems MPC-273 manual Configuring an L2TPv3 Tunnel Example, MPC-293

Implementing MPLS VPNs over IP Tunnels on Cisco IOS XR Software

Configuration Examples for MPLS VPNs over IP Tunnels

Configuration Examples for MPLS VPNs over IP Tunnels

This section provides the following examples:

•Configuring an L2TPv3 Tunnel: Example, page MPC-293

•Configuring the Global VRF Definition: Example, page MPC-293

•Configuring a Route-Policy Definition: Example, page MPC-293

•Configuring a Static Route: Example, page MPC-294

•Configuring an IPv4 Loopback Interface: Example, page MPC-294

•Configuring a CFI VRF Interface: Example, page MPC-294

Configuring an L2TPv3 Tunnel: Example

The following example shows how to configure an L2TPv3 tunnel:

tunnel-template t1 encapsulation l2tp

!

source Loopback0

!

Configuring the Global VRF Definition: Example

The following example shows how to configure an L2TPv3 tunnel:

vrf v1

address-family ipv4 unicast import route-target

1:1

!

export route-target 1:1

!

address-family ipv6 unicast import route-target

1:1

!

export route-target 1:1

!

Configuring a Route-Policy Definition: Example

The following example shows how to configure a route-policy definition:

configure route-policy pass-all pass

end-policy

!

	Cisco IOS XR MPLS Configuration Guide
OL-12284-01		MPC-293