Cisco Systems MPC-273 Configuring a Static Route, configure 2. router static 3. maximum path ipv4

Implementing MPLS VPNs over IP Tunnels on Cisco IOS XR Software

How to Configure MPLS VPNs over IP Tunnels

DETAILED STEPS

	Command or Action	Purpose
Step 1
	configure	Enters global configuration mode.
	Example:
	RP/0/RP0/CPU0:router# configure
Step 2
	route-policy name pass	Defines and passes a route policy.
	Example:
	RP/0/RP0/CPU0:router(config)# route-policy
	ottawa_admin pass
Step 3
	end policy	End of route-policy definition.
	Example:
	RP/0/RP0/CPU0:router(config-rpl)# end policy

Configuring a Static Route

Perform this task to add more than 4K static routes (Global/VRF).

SUMMARY STEPS

1.configure

2.router static

3.maximum path ipv4 1-140000

4.maximum path ipv6 1-140000

5.end or commit

DETAILED STEPS

	Command or Action	Purpose
Step 1
	configure	Enters global configuration mode.
	Example:
	RP/0/RP0/CPU0:router# configure
Step 2
	router static	Enters static route configuration subcommands.
	Example:
	RP/0/RP0/CPU0:router(config)# router static

	Cisco IOS XR MPLS Configuration Guide
MPC-280	OL-12284-01