Cisco Systems Network Assistant manual Feature Bar, Icon Task

Chapter 2 Network Assistant Features

Menu Bar, Toolbar, and Feature Bar

Table 2-1	Toolbar Icons and Buttons (continued)
Toolbar Option		Icon	Task
Topology			Display the Topology view.
Legend			Display the legend, which describes the icons, labels, and links.
Help for Active			Display the help topic for the active, open window. You can also click Help from the
Window			active window or press the F1 key.
Feedback			Open a Web page where you can leave feedback about your experience with Network
			Assistant.
Search			Enter terms in the field at the right of the toolbar, and click the Search button to search
			the online help.

1.Not available in read only mode. For more information about the read only and read-write access modes, see the “Privilege Levels” section on page 2-9.

2.Some options from this menu option are not available in read only mode.

Feature Bar

The feature bar shows the networking features that are available for the devices in your community or cluster. By default, the feature bar is in standard mode. In this mode, it is always visible, and you can reduce or increase its width. In autohide mode, the feature bar appears only when you move the cursor to the left edge of the Network Assistant workspace.

•To see the feature bar in standard mode, click Application > Feature Bar, and select Standard Mode.

•To hide the feature bar, click Application > Feature Bar, and select Autohide Mode.

Getting Started with Cisco Network Assistant

2-6 OL-6194-07