Cisco Systems manual Network Assistant-Related Features and Their Defaults

A P P E N D I X A

Configuring a Catalyst 4500 Series Switch for Network Assistant Management

This appendix describes how to configure a Catalyst 4500 series switch for Network Assistant. It also lists the Network Assistant feature defaults for the switch.

Note For complete information on configuring Network Assistant on the Catalyst 4500 series switch, see the “Configuring the Catalyst 4500 Series Switch with Cisco Network Assistant” chapter in the Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide.

Note For complete syntax and usage information for the switch commands used in this chapter, see the Catalyst 4500 Series Switch Cisco IOS Command Reference and related publications at this location: http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/index.htm.

This appendix contains these topics:

•Network Assistant-Related Features and Their Defaults, page A-1

•Configuring Your Switch for Network Assistant, page A-2

Network Assistant-Related Features and Their Defaults

Table A-1lists the Network Assistant-related configuration parameters on a Catalyst 4500 series switch.

	Table A-1	Network Assistant-Related Configuration on a Catalyst 4500 Series Switch
	Feature		Default Value		Recommended Value
	Authentication		Disabled		Optional
	IP address		Depends on		User selectable
			community or
			discovery option1
	IP HTTP port number		80		Optional2
	IP HTTPS port number		443		Optional3
	IP HTTP server		Disabled		Enabled4
	Cluster run		Disabled		Enabled5
				Getting Started with Cisco Network Assistant
OL-6194-07						A-1