Chapter 2 Network Assistant Features
Network Assistant Modes
Network Assistant Modes
You can use Network Assistant in these modes:
•Expert Mode—Configures a feature in a single window. Network Assistant is in expert mode by default. To run a feature in expert mode choose Expert in the Application menu. To access the online help in expert mode, click Help in the window.
•Guide Mode—Configures a feature one step at a time and displays the corresponding help information for the window that is appearing. Features that appear with a signpost icon on the feature bar (see Figure 2-5) means that you can run them in guide mode, When you select the feature, a series of steps guides you through the configuration for that feature.
To run guide mode, choose Guide in the Application menu, To run a guide-mode feature in Expert mode, you must choose Expert before selecting the feature.
Note Guide mode is not available if your switch access level is read only. For more information about the read only access mode, see the “Privilege Levels” section on page 2-9.
Figure 2-5 Guide Mode Signposts
1
2
200756
Guide mode icon | 2 | Menu items that support only the expert mode |
| | |
Getting Started with Cisco Network Assistant
