A-6
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Appendix A Voice Cards and PIMG Units
Intel Dialogic D/120JCT-LS and D/120JCT-Euro
Figure A-8 D/120JCT-LS and D/120JCT-Euro Connection Pinouts and Backplate
Hardware Settings

To Set the D/120JCT-LS and D/120JCT-Euro Card Switches

Step 1 Set the rotary switch (SW100) to a unique value for each card.
Each Intel Dialogic card in the Cisco Unity server or expansion chassis must have a unique value, starting with 1 and continuing in sequence on subsequent cards. For example, set the rotary sw itch on the first three voice cards as shown below. This is also the order in which you install the cards in the server.
55478

Pin 1: Unused

Pin 2: Tip 2

Pin 3: Ring 1

Pin 4: Tip 1

Pin 5: Ring 2

Pin 6: Unused

55475
Lines 1 and 2
Lines 3 and 4
Lines 5 and 6
Lines 7 and 8
Lines 9 and 10
Lines 11 and 12
55486
First card
Second card
Third card
1
2
3