5-4
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Chapter 5 Customizing the Cisco Unity Platform
Obtaining Cisco Unity License Files
To Install the IBM NIC-Configuration Utility by Using an Intel Disc
Step 1 Insert the Intel Ethernet Software disc in the DVD drive.
If the installation program does not appear automatically, browse to the root of the C D, and double-click
Autorun.exe.
Step 2 Follow the on-screen prompts to complete the installation.

Configuring a Dual NIC

To Configure a Dual NIC in the Cisco Unity Server
Step 1 Start the NIC-configuration utility:
a. On the Windows Start menu, click Settings > Control Panel.
b. Choose the applicable option, depending on the server model a nd NIC brand:
Step 2 Configure the dual NIC—or verify the configuration—so that the following conditions are met:
• Both NICs are connected to the same network segment (in other words, both are connected to
the same Layer 3 subnet and the same Layer 2 Ethernet broadcast domain).
• Both share the same IP address.
• Both are set up for AFT or for NFT. Refer to the NIC-configuration utility Help.
Step 3 Write down the MAC address that now applies to both NICs. You will need it when you obtain license
files in the “Obtaining Cisco Unity License Files” section on page 5-4.
Step 4 Restart the Cisco Unity server for any changes to take effect.
Obtaining Cisco Unity License Files
License files, which enable the features purchased by the c ustomer, are required for installing
Cisco Unity software, for some upgrades, and for adding or changing license d features. You obtain the
license files by completing registration information on Cisco.com.
Hewlett-Packard or Cisco MCS server
with model number ending in “H” Click HP Network.
IBM or Cisco MCS server
with model number ending in “I” • For a Broadcom dual NIC, click Broadcom Control
Suite 2.
• For an Intel dual NIC, click Intel(R) PROSet Wired .