Cisco Systems OL-13599-01 manual Click Start Cisco Unity

Appendix B Exiting and Starting the Cisco Unity Software and Server

Starting the Cisco Unity Software

To Start the Cisco Unity Software from the Cisco Unity Server

Step 1 On the Cisco Unity server, log on to Windows by using either the Cisco Unity administration account or an appropriate Windows domain account.

Step 2 Right-click the Cisco Unity icon in the status area of the taskbar.

(If the Cisco Unity icon is not in the taskbar, browse to the CommServer directory, and double-click AvCsTrayStatus.exe.)

Step 3 Click Start Cisco Unity.

When Cisco Unity starts successfully, three tones play and a check mark appears in the Cisco Unity icon.

When Cisco Unity does not start successfully, two tones play and an “X” appears in the Cisco Unity icon.

Step 4 Press Ctrl-Alt-Delete, then lock or log off of Windows to prevent access by unauthorized users.

Step 5 If the system uses the automated attendant and you routed calls to the operator before you exited the Cisco Unity software, reroute calls to Cisco Unity.

To Start the Cisco Unity Software from Another Computer

Step 1 If the Cisco Unity Status Monitor does not use Integrated Windows authentication, skip to Step 2.

When the Cisco Unity Status Monitor uses Integrated Windows authentication, do the following substeps to access the Status Monitor:

a.Log on to Windows by using either the Cisco Unity administration account or an appropriate Windows domain account.

b.Start Internet Explorer, and go to http://<Cisco Unity server name>/status.

c.If Internet Explorer prompts you for a user name and password, enter the user name, password, and domain for the Cisco Unity administration account or the Windows domain account.

d.Skip to Step 5.

Step 2 When the Cisco Unity Status Monitor uses Anonymous authentication, do the following substeps to access the Status Monitor:

a.Log on to Windows by using any domain account that has the right to log on locally.

b.Start Internet Explorer, and go to http://<Cisco Unity server name>/status.

Step 3 On the Cisco Unity Log On Page, do one of the following:

•Enter the full name and Internet password of a Domino account that is associated with an appropriate Cisco Unity subscriber account, and click Log On, then skip to Step 5.

•Click Log On Using Windows Authentication.

Step 4 On the Cisco Unity Log On page, enter the user name, password, and domain for the Cisco Unity administration account or the Windows domain account, and click Log On.

Step 5 In the Cisco Unity Status Monitor, click the System Status icon (the first icon), at the top of the page. Step 6 Click Start.

Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)

B-4 OL-13599-01