Cisco Systems OL-14361-01 manual Maximum paths, 126

Chapter 5 Configuring Additional Router Features

Configuration Limiting

Table 5-7	BGP Configuration Limits and Commands (continued)
		Default	Absolute		Show Current Settings
		Maximum	Maximum	Configuration Command	Command
Feature Limit Description		Limit	Limit	(Router Configuration Mode)	(EXEC Mode)
IPv4 multicast maximum prefixes		131,072	4,294,967,	maximum-prefix n	show bgp neighbor IP_address
that can be received from a			295
neighbor
IPv6 unicast maximum prefixes		131,072	4,294,967,	maximum-prefix n	show bgp neighbor IP_address
that can be received from a			295
neighbor
IPv6 multicast maximum prefixes		131,072	4,294,967,	maximum-prefix n	show bgp neighbor IP_address
that can be received from a			295
neighbor
IPv6 labeled unicast maximum		131,072	4,294,967,	maximum-prefix n	show bgp neighbor IP_address
prefixes that can be received from a			295
neighbor
VPNv4 unicast maximum prefixes		524,288	4,294,967,	maximum-prefix n	show bgp neighbor IP_address
that can be received from a			295
neighbor
VPNv6 unicast maximum prefixes		524,288	4,294,967,	maximum-prefix n	show bgp neighbor IP_address
that can be received from a			295
neighbor
Maximum equal-cost parallel		1	8	maximum-paths n	show running-config
routes to external peers					Note This command shows
					only changes to the
					default value. If the
					maximum paths
					command does not
					appear, the router is set
					to the default value.

	Cisco IOS XR Getting Started Guide
5-126	OL-14361-01